LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Removal And Installation >> Rear Seat - Third Row >> item 5: Rear Seat Third Row Backrest-to-Floor Outer Bolts Removal Note

item 5: Rear Seat Third Row Backrest-to-Floor Outer Bolts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold the third row seat backrest down and remove the rear load floor panel.
  2. Access the backrest to floor attachments.
    1. Release the trim fabric hook and loop fasteners.
    2. Remove the wheel jack storage cover.
    Fig 1: Removing Wheel Jack Storage Cover
    G03183896Courtesy of FORD MOTOR CO.
  3. Remove the jack assembly.
  4. Remove the two outer load floor support panel bolts and the load floor support panel.
scientia non olet · About LEMON Manuals