LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - 60 Percent of 60/40 Bench, Second Row >> Item 1: Latch Cover Screws Disassembly Note

Item 1: Latch Cover Screws Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: 40 percent seat shown, 60 percent seat similar.
    Fig 1: Releasing Seat Backrest J-Clip
    G03183906Courtesy of FORD MOTOR CO.
  1. Release the seat backrest J-clip.
  2. Remove all the staples in the backrest support panel.
    Fig 2: Removing Staples In Backrest Support Panel
    G03183907Courtesy of FORD MOTOR CO.
  3. Invert the seat backrest trim cover and foam pad to access the latch cover screws.
    Fig 3: Inverting Seat Backrest Trim Cover And Foam Pad To Access Latch Cover Screws
    G03183908Courtesy of FORD MOTOR CO.
  4. Remove the two screws and the cover (outboard shown, inboard similar). Detach the seat backrest material attachment from the latch cover.
    Fig 4: Removing Two Screws And Cover
    G03183909Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals