LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - 20 Percent, Second Row >> Item 7: Rear Seat 20 Percent Upper Latch Bolts Disassembly Note

Item 7: Rear Seat 20 Percent Upper Latch Bolts Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the release handle cable.
    1. Pinch to release the retainer clip.
    2. Remove the cable end hook from the retaining hole.
    3. Position the cable to the side.
    Fig 1: Removing Release Handle Cable
    G03183901Courtesy of FORD MOTOR CO.
  2. Release the seat backrest J-clip. Remove all the staples and lift the material to expose the backrest nut and bolts.
scientia non olet · About LEMON Manuals