LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Body Panel System - Body System - Exterior) >> Diagnosis And Testing >> Wipers and Washers >> Pinpoint Test Q: The Wipers Stay On Continuously >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the front wiper motor receives open and ground inputs from the multifunction switch through circuits 671 (LB), 680 (LB/OG), 682 (DB) and 684 (PK/YE) to activate the wipers to the appropriate speeds.