Auxiliary Transmission Fluid Cooler: Removal

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Drain the cooling system. For additional information, refer to ENGINE COOLING .
Remove the parts in the order indicated in the following illustrations and tables.

Fig 1: Identifying Removal Order Of Auxiliary Transmission Fluid Cooler (1 Of 2)
Courtesy of FORD MOTOR CO.

Fig 2: Identifying Removal Order Of Auxiliary Transmission Fluid Cooler (2 Of 2)
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
Fill and bleed the cooling system. For additional information, refer to ENGINE COOLING .
Fill and check the transmission fluid. For additional information, refer to TRANSMISSION FLUID LEVEL CHECK .
- Check the system for leaks.