LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> In-Vehicle Repair >> Auxiliary Transmission Fluid Cooler >> Item 11: Transmission Cooler Lines Removal Note

Item 11: Transmission Cooler Lines Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: If equipped, remove the safety retainer from the connector.
    Fig 1: Disconnecting Cooler Lines
    G03182076Courtesy of FORD MOTOR CO.
  1. Disconnect the cooler lines.
    • If equipped, use the special tool to disconnect the quick coupler.
    • If equipped, loosen and remove the screw clamp from the hose.
scientia non olet · About LEMON Manuals