Item 90: Reverse Brake Drum and Clutch Assembly Inspection Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The reverse one-way clutch is part of the reverse brake drum assembly. Install a new reverse brake drum as an assembly only.

Fig 1: Inspecting Reverse Brake Drum

Courtesy of FORD MOTOR CO.

Inspect the reverse brake drum assembly and install a new reverse brake drum assembly if damaged.
1. Inspect the reverse brake drum sprags.
2. Inspect the reverse brake drum rollers.
3. Inspect the reverse brake drum.