LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Overdrive Planetary and One-Way Clutch Assembly >> Item 1: Retaining Ring Disassembly Note

Item 1: Retaining Ring Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The overdrive one-way clutch is serviced with the center shaft assembly.
    Fig 1: Removing Overdrive Center Shaft Retaining Ring
    G03182235Courtesy of FORD MOTOR CO.
  1. Remove the center shaft from the overdrive ring gear.
    1. Remove the overdrive center shaft retaining ring.
    2. While rotating counterclockwise remove the center shaft from the ring gear.
scientia non olet · About LEMON Manuals