LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Exhaust gas recirculation (EGR) system module-to-exhaust manifold tube fittings 40 30 -
Fuel injection supply manifold bolts 10 - 89
Fuel pressure and temperature sensor 10 - 89
Throttle body bolts(1) - - -
Brush plate bolts 3 - 27
Starter motor bolt 25 18 -
Starter motor stud bolt 25 18 -
Starter motor ground cable nut 23 17 -
Starter solenoid B terminal nut 13 10 -
Starter solenoid S terminal nut 6 - 53
Battery cable clamp bolts 9 - 80
Spark plug 18 13 -
Camshaft position (CMP) sensor bolt 10 - 89
Crankshaft position (CKP) sensor bolt 10 - 89
Cylinder head temperature (CHT) sensor 26 19 -
Engine coolant temperature (ECT) sensor 20 15 -
Heated oxygen sensor (HO2S) 41 30 -
Knock sensor (KS) bolt 25 18 -
Mass air flow (MAF) sensor bolts 2 - 18
Powertrain control module (PCM) connector bolt 7 - 62
PCM nuts 8 - 71
PCM bracket bolt 10 - 89
Skid plate bolts (4x4) 10 - 89
(1) Refer to the procedure in this article.