LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Throttle Body >> Item 3: Throttle Body Bolt Installation Note

Item 3: Throttle Body Bolt Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stage
    1. : Tighten throttle body bolts in two stages.
    2. Tighten to 9 Nm (80 lb-in).
  2. Stage 2: Tighten an additional 90 degrees (1/4 turn).
scientia non olet · About LEMON Manuals