LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Fuel Injection Supply Manifold And Fuel Injector >> Item 23: O-Ring Seal Installation Note

Item 23: O-Ring Seal Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the new o-ring seals with clean engine oil before installing.
scientia non olet · About LEMON Manuals