LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Item 5: Power Steering Reservoir Bracket Nut Removal Note

Item 5: Power Steering Reservoir Bracket Nut Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nut and position the radio interference capacitor aside.
    Fig 1: Locating Bolt
    G03181884Courtesy of FORD MOTOR CO.