LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Item 2: Power Steering Pump Stud Bolts Installation Note

Item 2: Power Steering Pump Stud Bolts Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ground wire and the wiring harness bracket.
    Fig 1: Installing Ground Wire And Wiring Harness Bracket
    G03181889Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals