LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Engine Cooling System) >> Removal And Installation >> Water Pump - 4.6L >> Item 5: Coolant Pump O-ring Installation Note

Item 5: Coolant Pump O-ring Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new coolant pump gasket. Lubricate the gasket with clean engine coolant.
  2. Inspect the engine block. Clean the mounting surface as necessary with metal surface cleaner.
scientia non olet · About LEMON Manuals