LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Valve Cover LH >> Item 8: LH Valve Cover Gasket Removal Note

Item 8: LH Valve Cover Gasket Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean sealing surfaces. These tools cause scratches and gouges which make leak paths.
    Fig 1: Installing A New Gasket
    G03180458Courtesy of FORD MOTOR CO.
  1. Clean and inspect the sealing surfaces. Install a new gasket, if necessary.
scientia non olet · About LEMON Manuals