LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Exhaust Gas Recirculation (EGR) Valve >> Item 8: EGR System Module Gasket Installation Note

Item 8: EGR System Module Gasket Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new EGR system module gasket with the side with the raised circle facing the intake manifold.
    Fig 1: Installing A New EGR System Module Gasket With Side With Raised Circle Facing
    G03180446Courtesy of FORD MOTOR CO.