LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Camshaft, Valve Springs and Valve Seals - LH >> Item 2: Roller Follower Installation Note

Item 2: Roller Follower Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The roller followers must be installed in their original position.
    Fig 1: Installing Roller Followers
    G03180576Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the roller followers.