LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 550 (Engine System-General Information) >> General Procedures >> Piston - Ring-to-Groove Clearance

Piston - Ring-to-Groove Clearance

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the piston for ring land damage or accelerated wear.
    Fig 1: Inspecting Piston For Ring Land Damage
    G03180081Courtesy of FORD MOTOR CO.
  2. Measure the piston ring-to-groove clearance.
    • If out of specification, install new components as necessary.
    Fig 2: Measuring Piston Ring-To-Groove Clearance
    G03180082Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals