LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Steering System) >> Removal And Installation >> Steering Column Switches >> Item 6: Steering Column Upper Shroud Removal Note

Item 6: Steering Column Upper Shroud Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper steering column shroud.
    1. Release the retaining clips and rotate the upper steering column trim panel out of the instrument panel.
    2. Remove the upper steering column shroud hard shell.
    Fig 1: Removing Upper Steering Column Shroud Hard Shell
    G03180404Courtesy of FORD MOTOR CO.