LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Steering System) >> Removal And Installation >> Power Steering Pump - 4.0L SOHC >> Item 15: Pulley Bolts Removal Note

Item 15: Pulley Bolts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bolts, rotate the tensioner clockwise and remove the belt from the power steering pump pulley, and then remove the bolts.
scientia non olet · About LEMON Manuals