LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Anti-Lock Control System) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Tests >> Pinpoint Test K: DTC C1288 and C1440 (ABS With Stability Assist) - Brake Pressure Transducer Input Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The primary brake pressure transducer sends current to the ABS module proportional to the driver's brake pedal application.

Reference voltage is supplied by circuit 3601 (WH/RD). Ground is provided through circuit 3603 (RD). The transducer current is supplied by circuit 3600 (RD/WH).

Possible Causes 

scientia non olet · About LEMON Manuals