LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Brake System) >> Removal And Installation >> Front Disc Brake >> Item 5: Anchor Bracket Bolt Kit Removal Note

Item 5: Anchor Bracket Bolt Kit Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not allow the brake caliper to hang by the flexible brake hose.
  1. If removing the brake disc, only remove the caliper anchor bracket bolts and position and support the caliper and bracket aside.
    2. CAUTION: Do not allow the brake caliper and bracket assembly to hang by the flexible brake hose.
  2. Support the caliper and bracket assembly to the vehicle.
scientia non olet · About LEMON Manuals