LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Suspension System) >> Removal And Installation >> Wheel and Tire - Front >> Removal and Installation >> Item 2: Wheel Nuts Removal Note

Item 2: Wheel Nuts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can occur.
  1. With the weight of the vehicle on the wheels, loosen the wheel nuts.
  2. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to JACKING & LIFTING .