LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 531 (Information System & Warning System) >> Description And Operation >> Instrument Cluster >> Indicator Lamps >> Low Oil Pressure Indication

Low Oil Pressure Indication

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster is hardwired to the oil pressure switch. The oil pressure switch unit consists of a diaphragm and contact points, which are normally open. When there is low (under 41 kPa [6 psi]) or no oil pressure, the oil pressure switch remains open, removing the ground to the instrument cluster. When sufficient oil pressure exists, the oil pressure switch closes, providing a ground signal to the instrument cluster. The instrument cluster monitors the oil pressure ground signal and commands the low oil pressure warning indicator on or off according to engine oil pressure.