LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Throttle Body

Throttle Body

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Throttle body bore and plate area have a special coating and cannot be cleaned, or possible damage to the throttle body can occur.
  1. Remove the air cleaner outlet pipe. For additional information, refer to AIR CLEANER ASSEMBLY .
  2. Remove the parts in the order indicated in Fig 1.
    Fig 1: Throttle Body Removal Sequence
    G03244325Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.