LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Crankshaft Position (CKP) Sensor

Crankshaft Position (CKP) Sensor

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to IDENTIFICATION CODES .
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY & CHARGING SYSTEM .
  3. Remove the parts in the order indicated in Fig 1.
    Fig 1: Crankshaft Position (CKP) Sensor Removal Sequence
    G03244345Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals