LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Item 8: Power Steering Pump Bolts Removal Note

Item 8: Power Steering Pump Bolts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. The bolt that is positioned under the power steering pressure line fitting will remain with the pump.
scientia non olet · About LEMON Manuals