LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Exhaust Gas Recirculation (EGR) Valve >> Item 8: EGR System Module Gasket Removal Note

Item 8: EGR System Module Gasket Removal Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The EGR system module gasket sealing surfaces are soft metals.
  1. Do not reuse the EGR system module gasket. Carefully clean the EGR system module gasket sealing surfaces. Item 8: EGR System Module Gasket Installation Note
  1. Install a new EGR system module gasket with the side with the raised circle facing the intake manifold.
Fig 1: Identifying EGR System Module Gasket With Raised Circle Facing
G03243816Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals