LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Cylinder Head - LH >> Item 7: Cylinder Head Bolt Removal Note

Item 7: Cylinder Head Bolt Removal Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. The lower exhaust manifold studs must be removed to access the cylinder head bolts.
Fig 1: Removing Lower Exhaust Manifold Studs
G03243895Courtesy of FORD MOTOR CO.