LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Suspension System) >> Removal And Installation >> Wheel Bearing, Wheel Hub, Wheel Knuckle, And Lower Arm - Front >> Item 3: Wheel Hub And Bearing Assembly Installation Note

Item 3: Wheel Hub And Bearing Assembly Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the dust shield over the hub and bearing assembly, then fit the hub and bearing into the knuckle and seat it fully before installing the retaining bolts.
scientia non olet · About LEMON Manuals