LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Suspension System) >> Removal And Installation >> Wheel Bearing, Wheel Hub, Wheel Knuckle, And Lower Arm - Front >> Item 10: Lower Arm (LH/RH) Installation Note

Item 10: Lower Arm (LH/RH) Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: The lower control arm attachment-to-subframe bolts contain thread adhesive. Do not partially remove bolts. When removing or installing bolts, do so with one continuous sequence to prevent the adhesive from setting.
  1. Do not use air tools to tighten the lower arm nuts and bolts.