LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Safety Belt System) >> Removal And Installation >> Safety Belt Buckle - Center Facing Rear Seat >> Removal

Safety Belt Buckle - Center Facing Rear Seat: Removal

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center facing rear seat. For additional information, refer to SEATING .
  2. Unhook the trim cover retainer.
    Fig 1: Removing Center Facing Rear Seat
    G03278016Courtesy of FORD MOTOR CO.
  3. Reposition the seat back trim cover.
    Fig 2: Repositioning Seat Back Trim Cover
    G03278017Courtesy of FORD MOTOR CO.
  4. Remove the seat back trim cover and the safety belt buckle.
    1. Drill out the rivets.
    2. Remove the seat back trim cover and the safety belt buckle.
      Fig 3: Removing Seat Back Trim Cover And Safety Belt Buckle
      G03278018Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals