LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Safety Belt System) >> Removal And Installation >> Height Adjuster - Four-Door, SuperCab >> Removal

Height Adjuster - Four-Door, SuperCab: Removal

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the shoulder safety belt height adjuster.
    1. Use Safety Belt Bolt Bit to remove the two bolts.
    2. Remove the shoulder safety belt height adjuster.
      Fig 1: Removing Shoulder Safety Belt Height Adjuster
      G03277996Courtesy of FORD MOTOR CO.