LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Safety Belt System) >> Removal And Installation >> Height Adjuster - Four-Door, SuperCab >> Installation

Height Adjuster - Four-Door, SuperCab: Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing seat belt buckle or retractor assemblies.
  1. To install, reverse the removal procedure.
    • Use the special tool to install the bolts.
    • Check the restraint system for correct operation.
      Fig 1: Installing Shoulder Safety Belt Height Adjuster
      G03277997Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals