LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 477 (Manual Transmission, Clutch & Transfer Case - General Information) >> General Procedures >> Flywheel Runout Check

Flywheel Runout Check

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tool
G03276114Courtesy of FORD MOTOR CO.
  1. Mount the special tool so that the indicator contact point rides on the clutch disc contact surface.
  2. Turn the flywheel. If the runout exceeds the maximum allowance, install a new flywheel.
    Fig 2: Checking Flywheel Runout
    G03276115Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals