Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. For additional information, refer to JACKING & LIFTING .
Remove the nuts.

Fig 1: Removing Nuts
Courtesy of FORD MOTOR CO.
Lower the vehicle.
Remove the RH exhaust manifold.

Fig 2: Removing RH Exhaust Manifold
Courtesy of FORD MOTOR CO.

NOTE: Use new exhaust manifold gaskets and nuts.

To install, reverse the removal procedure.