LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Engine - 3.0L (2V)) >> In-Vehicle Repair >> Oil Pan Baffle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to OIL PAN - 4X2  or OIL PAN - 4x4 .
  2. Remove the fasteners and the oil pan baffle.
    Fig 1: Removing Oil Pan Baffle
    G03274123Courtesy of FORD MOTOR CO.
  3. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals