LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Cooling System Specifications & Drive Belt Routing) >> Cooling System Specifications >> Coolant Replacement Interval

Coolant Replacement Interval

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2002 Mercury Villager, 2002 Mercury Mountaineer, 2002 Lincoln Navigator, 2002 Lincoln Blackwood, and 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Never remove the radiator cap under any conditions while the engine is operating. Failure to follow these instructions could result in personal injury and/or damage to the cooling system or engine. To avoid having scalding hot coolant or steam blow out of the radiator, use extreme care when removing the radiator cap from a hot radiator. Wait until the engine has cooled, then wrap a thick cloth around the radiator cap and turn it slowly to the first stop. Step back while the pressure is released from the cooling system. When you are certain all the pressure has been released, press down on the radiator cap (with a cloth), turn and remove.
NOTE: The addition of Motorcraft Cooling System Stop Leak Pellets (VC-6), darkens Motorcraft Premium Gold Engine Coolant from Yellow to Golden Tan.

To maintain the integrity of the coolant and the cooling system:

COOLANT REPLACEMENT INTERVAL

Application Specification - Miles
Green Coolant (1) 45,000
Orange Coolant (2) 150,000
Yellow Coolant (3) 100,000
(1) Motorcraft Premium Engine Coolant VC-4-A (in Oregon, VC-5, in Canada CXC-10), or equivalent meeting Ford specification ESE-M97B44-A (Green in color).
(2) Motorcraft Specialty Orange Engine Coolant such as VC-2, meeting Ford specification WSS-M97B44-D.
(3) The addition of Motorcraft Cooling System Stop Leak Pellets, VC-6, darkens Motorcraft Premium Gold Engine Coolant from Yellow to Golden Tan.