LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Anti-Theft) >> Diagnosis And Testing >> Passive Anti-Theft System (PATS) - Pinpoint Tests >> Connector Circuit Reference >> Instrument Cluster C220a

Instrument Cluster C220a

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Instrument Cluster C220A Connector Pinouts
G03203229Courtesy of FORD MOTOR CO.
INSTRUMENT CLUSTER C220A CONNECTOR PINOUTS REFERENCE

Pin Number(s) Circuit Designation/Description Normal Condition/Measurement
10 10-GL6 (GY/VT) transmits signal to anti-theft LED 0 voltage, 5 ohms or less between the instrument cluster and the anti-theft LED. Greater than 10,000 ohms to ground with the instrument cluster and the anti-theft LED disconnected.