LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 431 (Information, Gauges & Warning Devices) >> General Procedures >> Belt Minder Deactivating/Activating >> Preparation

Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deactivating/activating the belt minder, set the parking brake.
  2. Place the automatic transmission in the PARK position.
  3. Key in OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the parking lamps/headlamps switch in the OFF position.
scientia non olet · About LEMON Manuals