LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Fuel System) >> Removal And Installation >> Inertia Fuel Shutoff (IFS) Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left-hand lower A-pillar trim panel.
  2. Remove the components in the order indicated in the following illustration and table. See Fig 1.
    Fig 1: Removing Components In Fuel Shut-Off Switch
    G03202133Courtesy of FORD MOTOR CO.