LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Intake Air, Fuel Charging, Starting & Engine Electronics - 3.0L) >> Removal And Installation >> Throttle Body

Throttle Body

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The electronic throttle body is serviced as a complete assembly. Individual components cannot be serviced.
CAUTION: Throttle body bore and plate area have a special coating and cannot be cleaned, or possible damage to the throttle body can occur.
  1. Remove the engine appearance cover.
  2. Remove the air cleaner outlet tube. For additional information, refer to AIR CLEANER ASSEMBLY  in this section.
  3. Remove the components in the order indicated in the following illustration and table. See Fig 1.
  4. To install, reverse the removal procedure.
    Fig 1: Exploded View Of Throttle Body
    G03201476Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals