LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Engine - 3.0L) >> In-Vehicle Repair >> Oil Pressure Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the components in the order indicated in the following illustration and table.
  2. To install, reverse the removal procedure.
    Fig 1: Removing Oil Pressure Switch
    G03200484Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals