LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Engine - 3.0L) >> Diagnosis And Testing >> Accessory Drive >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Condition Possible Sources Action
  • Accessory drive belt cracking (over 15 cracks in a rib over a distance of 100 mm [4.0 in])
  • Accessory drive belt.
  • INSPECT the accessory drive belt. REFER to INSPECTION AND VERIFICATION  in this section. INSTALL a new accessory drive belt as necessary.
  • Accessory drive belt chunking
  • Accessory drive belt.
  • INSPECT the accessory drive belt. REFER to INSPECTION AND VERIFICATION  in this section. INSTALL a new accessory drive belt as necessary.
  • Accessory drive belt noise, squeal, chirping or flutter
  • Defective/worn or incorrect accessory drive belt.
  • Misaligned pulley (s).
  • Pulley runout.
  • Damaged or worn accessories.
  • Fluid contamination of accessory drive belt or pulleys.
  • REFER to COMPONENT TESTS , Drive Belt, Noise/Flutter in this section. REPAIR or INSTALL new parts as necessary.
  • Damaged or worn accessory drive belt tensioner.
  • REFER to COMPONENT TESTS , Belt Tensioner - Mechanical and Belt Tensioner - Dynamics in this section. INSTALL a new accessory drive belt tensioner as necessary.
  • Premature accessory drive belt wear
  • Defective accessory drive belt.
  • Misaligned pulley(s).
  • Pulley runout.
  • Damaged accessories.
  • Incorrectly installed drive belt.
  • Fluid contamination.
  • REFER to COMPONENT TESTS , Drive Belt Noise/Flutter and Incorrect Drive Belt Installation in this section. REPAIR or INSTALL new parts as necessary.
  • Accessory drive belt does not hold proper tension
  • Accessory drive belt has excessive cracking or damage.
  • Drive belt tensioner worn or damaged.
  • CHECK the drive belt tensioner for damage and correct operation. REFER to the COMPONENT TESTS , Belt Tensioner - Mechanical and Belt Tensioner - Dynamics in this section. INSTALL a new drive belt tensioner as necessary.
  • Accessory drive component failure.
  • CHECK the accessory drive components. INSTALL new components as necessary.
  • Accessory drive belt idler pulley bearing failure.
  • INSPECT the accessory drive belt idler pulley for freedom of rotation and damage. INSTALL a new accessory drive belt idler pulley as necessary.