LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Disc Brakes) >> Removal & Installation >> Parking Brake >> Removal & Installation - Rear Cable

Removal & Installation - Rear Cable

WARNING: This page is about a different car, the 2004 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove console. Perform steps  1 - 3 under REMOVAL & INSTALLATION - FRONT CABLE.
  2. Disconnect parking brake rear cable and conduit from the parking brake lever on rear caliper. See Figure .
  3. Using a 13 mm box-end wrench, depress the conduit retaining prongs and remove the parking brake rear cable and conduit.
  4. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals