LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Disc Brakes & Drum Brakes) >> Overhaul >> Wheel Cylinders >> Reassembly

Wheel Cylinders: Reassembly

WARNING: This page is about a different car, the 2003 Ford Windstar and 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

If cylinder bore is lightly pitted or scratched, hone or replace as necessary. DO NOT hone cylinders more than .003" (.08 mm). Coat all parts with clean brake fluid. To assemble, reverse disassembly procedure. Clamp brake cylinder pistons against ends of cylinder.

scientia non olet · About LEMON Manuals