LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Manual Transmission) >> Disassembly & Assembly Of Subassemblies >> Input Shaft Bearing >> Assembly

Input Shaft Bearing: Assembly

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, press a new bearing on the input shaft.
    Fig 1: Pressing Bearing On Input Shaft
    G02153641Courtesy of FORD MOTOR CO.
  2. Install the front bearing oil scoop ring.
    • A click should be felt as the scoop ring notches align with the input shaft oil holes.
    Fig 2: Installing Front Bearing Oil Scoop Ring
    G02153642Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals