Special Tool(s)

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tool(s)

Courtesy of FORD MOTOR CO.

NOTE: Crankshaft main bearing journals must be within specifications before checking journal clearance.

Remove the crankshaft main bearing caps and crankshaft main bearing.
Lay a piece of Plastigage across the face of each crankshaft main bearing surface.

Fig 2: Laying Plastigage Across Face Of Crankshaft Main Bearing Surface
Courtesy of FORD MOTOR CO.

NOTE: Do not turn the crankshaft while carrying out this procedure.

Install and remove the crankshaft main bearing cap.
Verify the crankshaft journal clearance.
- Refer to appropriate ENGINE article for the procedure.
- If out of specification, install new components as necessary. Refer to appropriate ENGINE article for the procedure.
Fig 3: Checking Crankshaft Journal Clearance
Courtesy of FORD MOTOR CO.