LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (Rear Drive Axle/Differential 8.8-Inch Ring Gear) >> Diagnosis & Testing >> Checking Tooth Contact Pattern & Condition Of The Ring & Pinion >> High, Thin Contact Pattern In the Center Of the Tooth

High, Thin Contact Pattern In the Center Of the Tooth

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ring & Pinion Tooth Contact Pattern (High, Thin Contact Pattern In Center Of Tooth)
G03434432Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals