LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 379 (Automatic Transmission Cooling System) >> Removal And Installation >> Transmission Fluid Cooler Tubes - 4R100 Transmission >> Removal

Transmission Fluid Cooler Tubes - 4R100 Transmission: Removal

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist.
  2. If not done previously, carry out the transmission fluid cooler flow test procedure. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 4R100 - E225-E550 .
    3. NOTE: If cooler bypass valve (CBV) assembly (7H322) removal is necessary, refer to COOLER BYPASS VALVE - 4R100 TRANSMISSION .
    Fig 1: Removing Fluid Cooler Tube
    G03404915Courtesy of FORD MOTOR CO.
  3. Remove the fluid cooler tube(s)/hose(s), as necessary.
scientia non olet · About LEMON Manuals